DC ARC furnace for Sponge iron/DRI (Direct Reduced Iron)/Spongy iron melting
DC ARC furnace for Sponge iron/DRI (Direct Reduced Iron)/Spongy iron melting
When ferro ore was reduced to sponge iron by blast furnace, it must be melted by Electric Arc Furnace (EAF) to remove the impurities, then adjust the component to your required steel. So EAF can be used to produce Pure iron, Fine carbon steel, Casting iron, Metal refining, also can be used to hold Temperature for using.
- Description
- DC ARC furnace for Sponge iron/DRI (Direct Reduced Iron)/Spongy iron melting
- DC ARC furnace for Sponge iron/DRI (Direct Reduced Iron)/Spongy iron melting
- Inquiry
DC ARC furnace for Sponge iron/DRI (Direct Reduced Iron)/Spongy iron melting
When ferro ore was reduced to sponge iron by blast furnace, it must be melted by Electric Arc Furnace (EAF) to remove the impurities, then adjust the component to your required steel. So EAF can be used to produce Pure iron, Fine carbon steel, Casting iron, Metal refining, also can be used to hold Temperature for using.
We can produce one electrode and three electrodes DC electric arc furnace, this will base on the equipment’s producing capacity. Whether melting metal or nonmetal, DC arc furnace can save more than 20% energy than AC furnace, because melting material will be turned up from bottom following electric current just like mixing, so the melting speed will be higher. Such as melting one ton scrap steel powder, the consumption of DC ARC furnace will be 610 KWh, but induction furnace will be 1100 KWh.
If you need larger furnace, it should be AC equipment, because the rectifier system will be very complex and expensive, but AC will be simple and easy to maintain.
In a word, we can produce DC Electric ARC furnace (EAF), AC Electric ARC furnace (EAF) and Submerged ARC furnace (SAF), this will base on customer’s raw material, producing capacity, and products, if you want to melt steel, scrap iron powder, Silicon, Ferro-silicon, Ferro-chrome, Ferro-manganese, Ferro-tungsten and other alloys, please feel free to inquire us the details.
DC ARC furnace for Sponge iron/DRI (Direct Reduced Iron)/Spongy iron melting
When ferro ore was reduced to sponge iron by blast furnace, it must be melted by Electric Arc Furnace (EAF) to remove the impurities, then adjust the component to your required steel. So EAF can be used to produce Pure iron, Fine carbon steel, Casting iron, Metal refining, also can be used to hold Temperature for using.
DC ARC furnace for Sponge iron/DRI (Direct Reduced Iron)/Spongy iron melting
When ferro ore was reduced to sponge iron by blast furnace, it must be melted by Electric Arc Furnace (EAF) to remove the impurities, then adjust the component to your required steel. So EAF can be used to produce Pure iron, Fine carbon steel, Casting iron, Metal refining, also can be used to hold Temperature for using.
Related Products
-
Small Smelting Furnace
Small Smelting Furnace
This furnace can be used for producing Ferrosilicon, Silicon iron, Silicoferrite, Ferrosilicium, Si-Al-Calcium Barium Ferroalloy, Silicon-Aluminium-Calcium-Barium-Ferrous alloy, Ferromanganese, Manganeisen, Manganese iron, Ferrochrome, Ferrochromium, low carbon Ferro-chromium and Ferro magnesium.
Submerged ARC Furnace (SAF) is used for melting alloy and other nonconductive material, because the electric ARC will be happened below raw material, it means electric ARC is submerged under the material, so it is called Submerged ARC Furnace (SAF).
-
Electric ARC Furnace (EAF)
-
Metal melting machine
Metal melting machine
Metal melting machine can be used to produce Pure iron, Fine carbon steel, Casting iron, Metal refining, also can be used to hold Temperature for using.
-
Ferromanganese/Manganeisen/Ferro magnesium alloy melting furnace
Ferromanganese/Manganeisen/Ferro magnesium alloy melting furnace
This furnace is used for producing Ferrosilicon, Silicon iron, Silicoferrite, Ferrosilicium, Si-Al-Calcium Barium Ferroalloy, Silicon-Aluminium-Calcium-Barium-Ferrous alloy, Ferromanganese, Manganeisen, Manganese iron, Ferrochrome, Ferrochromium, low carbon Ferro-chromium and Ferro magnesium.
Submerged ARC Furnace (SAF) is used for melting alloy and other nonconductive material, because the electric ARC will be happened below raw material, it means electric ARC is submerged under the material, so it is called Submerged ARC Furnace (SAF).
-
Silicon sand/Ceramic/Silicon carbide melting furnace
Silicon sand/Ceramic/Silicon carbide melting furnace
This furnace is used for producing Ferrosilicon, Silicon iron, Silicoferrite, Ferrosilicium, Si-Al-Calcium Barium Ferroalloy, Silicon-Aluminium-Calcium-Barium-Ferrous alloy, Ferromanganese, Manganeisen, Manganese iron, Ferrochrome, Ferrochromium, low carbon Ferro-chromium and Ferro magnesium.
Submerged ARC Furnace (SAF) is used for melting alloy and other nonconductive material, because the electric ARC will be happened below raw material, it means electric ARC is submerged under the material, so it is called Submerged ARC Furnace (SAF).
-
Small producing capacity Submerged ARC Furnace for Ferro Alloy melting
Small producing capacity Submerged ARC Furnace for Ferro Alloy melting
Submerged ARC Furnace (SAF) is used for melting alloy and other nonconductive material, because the electric ARC will be happened below raw material, it means electric ARC is submerged under the material, so it is called Submerged ARC Furnace (SAF).
In fact, it just be normal Electric ARC furnace (EAF). Usually it is used for melting Silicon, Ferro-silicon, Ferro-chrome, Ferro-manganese, Ferro-tungsten and other alloys.
-
Small DC Electric ARC Furnace (EAF)
We specially focus on small DC ARC furnace, because it is safe, has high efficiency and Low energy consumption, the higher temperature can melt most of metal and nonmetal quickly.
EAF is workable for adding any material, because melting material will be writhed follow electric current, the material can be mixed uniformly.
Whether melting metal or nonmetal, DC ARC furnace will save more energy than AC furnace, because melting material will be rolled up from bottom follow with electric current (Fully Stirred), so the melting speed will be quickly, also it is workable to add any material and adjust the content of chemical element.
EAF also be named Submerged Arc Furnace, because if melt non-conductor product, the firing point will under the material, so the name means that electric arc is submerged in the material.
-
Silicon-Aluminium-Calcium-Barium-Ferrous alloy melting furnace
Silicon-Aluminium-Calcium-Barium-Ferrous alloy melting furnace
This furnace is used for producing Ferrosilicon, Silicon iron, Silicoferrite, Ferrosilicium, Si-Al-Calcium Barium Ferroalloy, Silicon-Aluminium-Calcium-Barium-Ferrous alloy, Ferromanganese, Manganeisen, Manganese iron, Ferrochrome, Ferrochromium, low carbon Ferro-chromium and Ferro magnesium.
Submerged ARC Furnace (SAF) is used for melting alloy and other nonconductive material, because the electric ARC will be happened below raw material, it means electric ARC is submerged under the material, so it is called Submerged ARC Furnace (SAF).
-
Scrap iron melting furnace
When ferro ore was reduced to sponge iron by blast furnace, it should be melted by Electric Arc Furnace (EAF) to remove the impurities, then adjust the component to your required steel. So EAF can be used to produce Pure iron, Fine carbon steel, Casting iron, Metal refining, also can be used to hold Temperature for using.
-
DC Electric ARC furnace for Casting iron/Metal refining/Fine cabon steel melting
DC Electric ARC furnace for Casting iron/Metal refining/Fine cabon steel melting
When ferro ore was reduced to sponge iron by blast furnace, it must be melted by Electric Arc Furnace (EAF) to remove the impurities, then adjust the component to your required steel. So EAF can be used to produce Pure iron, Fine carbon steel, Casting iron, Metal refining, also can be used to hold Temperature for using.
